Free Shipping all November, ends soon
    Up to 20% Off Selected Sizes – Website Only
    ExcellentTrustpilot

    Rug Under Dining Table: The UK Size Guide

    The single rule for dining rugs: every chair leg must stay on the rug, even when pulled out. Here are the exact sizes by seat count, shape rules, and material tips so you get it right first time.

    Quick answer: add 60–75 cm to every side of your table. A 180 × 90 cm table needs a rug of about 300 × 240 cm; a 200 × 100 cm table needs roughly 320 × 250 cm.

    Dining table with chairs sitting fully on a large flatweave rug in a modern UK home

    The 60–75 cm Rule

    Take your dining table's footprint, then add at least 60 cm – ideally 75 cm – to every side. That gives chairs room to slide out for sitting and standing without catching on the rug edge. The most common mistake is buying a rug only slightly larger than the table itself – chairs end up half-on, half-off, and the look is jarring.

    If you're sizing rugs for other rooms too, our UK rug size guide covers every room in one place.

    Dining Rug Sizes by Seat Count

    SeatsTable SizeRug Size (cm)Rug Size (ft)
    4 seats120 × 80 cm240 × 2008' × 6'6"
    6 seats180 × 90 cm300 × 24010' × 8'
    8 seats220 × 100 cm350 × 25011'6" × 8'
    10 seats260 × 110 cm400 × 28013' × 9'

    These are minimums. If your table sits within an open-plan room, sizing up by 20–30 cm helps anchor the zone. Every rug at The Rug Office is made bespoke in any custom size.

    Worked Examples by Table and Chairs

    Dining rug size for 4 chairs

    A 120 × 80 cm table with two chairs per side needs about 240 × 200 cm (8' × 6'6"). If your chairs have arms or deep seats, move up to 250 × 200 cm so the back legs never hit the edge.

    Dining rug size for 6 chairs

    The most common UK setup – a 180 × 90 cm table – needs at least 300 × 240 cm (10' × 8'). With a chair at each end, check the length: 180 cm table + 2 × 60 cm = 300 cm minimum.

    Dining rug size for 8 chairs

    A 220 × 100 cm table seating eight needs roughly 350 × 250 cm (11'6" × 8'). If four chairs sit on each long side with none at the ends, you can shorten the rug to about 340 cm but keep the full width.

    Dining rug size for 10–12 chairs

    Long tables of 260 cm or more need 400 × 280 cm (13' × 9') or larger. At this scale a custom size is usually the only way to keep every chair on the rug.

    Extendable tables and benches

    Size for the table at its extended length if you extend it more than a few times a year. Benches need less clearance than chairs – around 45–50 cm beyond the table edge is enough on bench sides.

    Round Tables – Round Rugs

    Match shape to shape. A 120 cm round table works with a 240 cm round rug, a 150 cm round table works with a 280–300 cm round rug. The visual rhythm of two concentric circles is one of the most satisfying layouts in interior design.

    Browse round options in our full rug catalogue – round is available as a custom shape on every design.

    The Best Material for a Dining Rug

    Low-pile or flatweave is non-negotiable. High-pile and shaggy rugs trap crumbs, catch chair legs, and are difficult to clean. A wool flatweave gives you the warmth and durability of wool without the practical headaches.

    Read our flatweave rugs guide for the full breakdown, and our texture guide for visual comparisons across constructions.

    Common Mistakes to Avoid

    • ×Buying too small. If chairs catch on the rug when pulled out, the size is wrong – go up.
    • ×High-pile under a dining table. Beautiful, impractical. Crumbs and chair drag will ruin both the rug and the look.
    • ×Mismatched shapes. Round rug under a rectangular table almost always reads as a mistake.
    • ×Skipping the underlay. A grippy rug pad stops sliding when chairs are pulled out, and protects the floor.

    Frequently Asked Questions

    Shop Dining-Friendly Rugs

    Hand-woven flatweave and low-pile rugs, made to your exact size and shipped worldwide.